View source for Cray-2

{{Short description|1985 supercomputer model}}
{{Refimprove|date=September 2016}}
{{Infobox computer
| Photo         = [[File:CRAY-2 IMG 8915-8913-8912a.jpg|250px]]
| caption       = Cray-2 central unit (foreground) and [[Fluorinert]]-cooling "waterfall" (background), on display at the [[École Polytechnique Fédérale de Lausanne|EPFL]].
| Name          = Cray-2
| logo          = [[File:CRAY-2 IMG 8971.CR2-logo.jpg|250px]]
| manufacturer  = [[Cray Research]]
| Type          = [[Supercomputer]]
| Released      = {{Start date|1985}}
| Discontinued  = 1990
| units sold    = 25
| Processor     = Custom Vector Processors
| Memory        = 
| OS            = 
| predecessor   = [[Cray X-MP]]
}}
[[Image:Cray2.jpg|thumb|A Cray-2 and its [[Fluorinert]]-cooling "waterfall", formerly serial number 2101, the only 8-processor system ever made, for [[NERSC]]]]
[[Image:Cray2.jpeg|thumb|A Cray-2 operated by [[NASA]]]]
[[File:Cray-2-1985.jpg|thumb|Front view of 1985 [[Supercomputer]] Cray-2, [[Musée des Arts et Métiers]], [[Paris]]]]
[[File:1985-Cray-2-side-view.jpg|thumb|Side view of 1985 [[Supercomputer]] Cray-2, [[Musée des Arts et Métiers]], [[Paris]]]]
[[Image:EPFL CRAY-II 1.jpg|thumb|Detail of the upper part of the Cray-2]]
[[Image:EPFL CRAY-II 2.jpg|thumb|Inside of the Cray-2]]

The '''Cray-2''' is a [[supercomputer]] with four [[vector processor]]s made by [[Cray Research]] starting in 1985. At 1.9 [[FLOPS|GFLOPS]] peak performance, it was the fastest machine in the world when it was released, replacing the [[Cray X-MP]] in that spot. It was, in turn, replaced in that spot by the [[Cray Y-MP]] in 1988.

The Cray-2 was the first of [[Seymour Cray]]'s designs to successfully use multiple CPUs. This had been attempted in the [[CDC 8600]] in the early 1970s, but the [[emitter-coupled logic]] (ECL) [[transistor]]s of the era were too difficult to package into a working machine. The Cray-2 addressed this through the use of ECL [[integrated circuit]]s, packing them in a novel 3D wiring that greatly increased circuit density.

The dense packaging and resulting heat loads were a major problem for the Cray-2. This was solved in a unique fashion by forcing the electrically inert [[Fluorinert]] liquid through the circuitry under pressure and then cooling it outside the processor box. The unique "waterfall" cooler system came to represent high-performance computing in the public eye and was found in many informational films and as a movie prop for some time.

Unlike the original Cray-1, the Cray-2 had difficulties delivering peak performance. Other machines from the company, like the X-MP and Y-MP, outsold the Cray-2 by a wide margin. When Cray began development of the [[Cray-3]], the company chose to develop the [[Cray C90]] series instead. This is the same sequence of events that occurred when the 8600 was being developed, and as in that case, Cray left the company.

== Initial design ==
With the successful launch of his famed [[Cray-1]], [[Seymour Cray]]  turned to the design of its successor. By 1979 he had become fed up with management interruptions in what was now a large company, and as he had done in the past, decided to resign his management post and move to form a new lab. As with his original move to [[Chippewa Falls, Wisconsin]] from [[Control Data]] HQ in [[Minneapolis|Minneapolis, Minnesota]], Cray management understood his needs and supported his move to a new lab in [[Boulder, Colorado]]. Working as an independent consultant at these new Cray Labs, starting in 1980 he put together a team and started on a completely new design. This lab would later close, and a decade later a new facility in [[Colorado Springs, Colorado|Colorado Springs]] would open.

Cray had previously attacked the problem of increased speed with three simultaneous advances: more functional units to give the system higher parallelism, tighter packaging to decrease signal delays, and faster components to allow for a higher clock speed. The classic example of this design is the [[CDC 8600]], which packed four [[CDC 7600]]-like machines based on [[emitter coupled logic|ECL logic]] into a 1 × 1 meter cylinder and ran them at an 8 [[Orders of magnitude (time)|ns]] cycle speed (125 [[Hertz|MHz]]). Unfortunately, the density needed to achieve this cycle time led to the machine's downfall. The circuit boards inside were densely packed, and since even a single malfunctioning [[transistor]] would cause an entire module to fail, packing more of them onto the cards greatly increased the chance of failure. Cooling the closely packed individual components also represented a major challenge.

One solution to this problem, one that most computer vendors had already moved to, was to use [[integrated circuit]]s (ICs) instead of individual components. Each IC included a selection of components from a module pre-wired into a circuit by the automated construction process. If an IC did not work, another one would be tried. At the time the 8600 was being designed the simple [[MOSFET]]-based technology did not offer the speed Cray needed. Relentless improvements changed things by the mid-1970s, however, and the [[Cray-1]] had been able to use newer ICs and still run at a respectable 12.5 ns (80&nbsp;MHz). In fact, the Cray-1 was actually somewhat faster than the 8600 because it packed considerably more logic into the system due to the ICs' small size.

Although IC design continued to improve, the physical size of the ICs was constrained largely by mechanical limits; the resulting component had to be large enough to solder into a system. Dramatic improvements in density were possible, as the rapid improvement in [[microprocessor]] design was showing, but for the type of ICs used by Cray, ones representing a very small part of a complete circuit, the design had plateaued. In order to gain another 10-fold increase in performance over the Cray-1, the goal Cray aimed for, the machine would have to grow more complex. So once again he turned to an 8600-like solution, doubling the clock speed through increased density, adding more of these smaller processors into the basic system, and then attempting to deal with the problem of getting heat out of the machine.

Another design problem was the increasing performance gap between the processor and [[main memory]]. In the era of the [[CDC 6600]] memory ran at the same speed as the processor, and the main problem was feeding data into it. Cray solved this by adding ten smaller computers to the system, allowing them to deal with the slower external storage (disks and tapes) and "squirt" data into memory when the main processor was busy. This solution no longer offered any advantages; memory was large enough that entire data sets could be read into it, but the processors ran so much faster than memory that they would often spend long times waiting for data to arrive. Adding four processors simply made this problem worse.

To avoid this problem the new design banked memory and two sets of registers (the B- and T-registers) were replaced with a 16 [[Word (data type)|KWord]] block of the very fastest memory possible called a ''Local Memory,'' not a cache, attaching the four ''background processors'' to it with separate high-speed pipes. This Local Memory was fed data by a dedicated ''foreground processor'' which was in turn attached to the main memory through a Gbit/s channel per CPU; X-MPs by contrast had three, for two simultaneous loads and a store and Y-MP/C-90s had five channels to avoid the [[von Neumann bottleneck]]. It was the foreground processor's task to "run" the computer, handling storage and making efficient use of the multiple channels into main memory. It drove the background processors by passing in the instructions they should run via eight 16-[[Word (data type)|word]] buffers, instead of tying up the existing cache pipes to the background processors. Modern CPUs use a variation of this design as well, although the foreground processor is now referred to as the ''load/store unit'' and is not a complete machine unto its own.

Main memory banks were arranged in quadrants to be accessed at the same time, allowing programmers to scatter their data across memory to gain higher parallelism. The downside to this approach is that the cost of setting up the ''scatter/gather unit'' in the foreground processor was fairly high. Stride conflicts corresponding to the number of memory banks suffered a performance penalty (latency) as occasionally happened in power-of-2 FFT-based algorithms.  As the Cray 2 had a much larger memory than Cray 1s or X-MPs, this problem was easily rectified by adding an extra unused element to an array to spread the work out.

=== Packed circuit boards and new design ideas ===
Early Cray-2 models soon settled on a design using large circuit boards packed with ICs. This made them extremely difficult to solder together, and the density was still not enough to reach their performance goals. Teams worked on the design for about two years before even Cray himself "gave up" and decided it would be best if they simply canceled the project and fired everyone working on it. Les Davis, Cray's former design collaborator who had remained at Cray headquarters, decided it should be continued at low priority. After some minor personnel movements, the team continued on much as before.

[[Image:Cray-2 module side view.jpg|right|288px|thumb|Typical logic module, showing the  tight packing. The [[pogo pin]]s connecting the cards together are the gold-colored rods seen between the ICs.]]

Six months later Cray had his "[[Eureka (word)|eureka]]" moment. He called the main engineers together for a meeting and presented a new solution to the problem. Instead of making one larger circuit board, each "card" would instead consist of a 3-D stack of eight, connected together in the middle of the boards using pins sticking up from the surface (known as "pogos" or "z-pins"). The cards were packed right on top of each other, so the resulting stack was only about 30&nbsp; mm high.

With this sort of density there was no way any conventional air-cooled system would work; there was too little room for air to flow between the ICs. Instead the system would be immersed in a tank of a new inert liquid from [[3M]], [[Fluorinert]]. The cooling liquid was forced sideways through the modules under pressure, and the flow rate was roughly one inch per second.  The heated liquid was cooled using chilled water heat exchangers and returned to the main tank. Work on the new design started in earnest in 1982, several years after the original start date.

While this was going on the [[Cray X-MP]] was being developed under the direction of [[Steve Chen (computer engineer)|Steve Chen]] at Cray headquarters, and looked like it would give the Cray-2 a serious run for its money. In order to address this internal threat, as well as a series of newer Japanese Cray-1-like machines, the Cray-2 memory system was dramatically improved, both in size as well as the number of "pipes" into the processors. When the machine was eventually delivered in 1985, the delays had been so long that much of its performance benefits were due to the faster memory. Purchasing the machine really made sense only for users with huge data sets to process.

The first Cray-2 delivered possessed more physical memory (256 [[Word (computer architecture)|MWord]]) than all previously delivered Cray machines combined.  Simulation moved from a 2-D realm or coarse 3-D to a finer 3-D realm because computation did not have to rely on slow virtual memory.  <!-- This inability to trade space (memory) for time (speed) is what defines supercomputation (extreme, high-end computing){{Fact|date=March 2010}}. -->

== Uses and successors ==
The Cray-2 was predominantly developed for the [[United States]] Departments of [[United States Department of Defense|Defense]] and [[United States Department of Energy|Energy]]. Uses tended to be for [[nuclear weapon]]s research or [[oceanography|oceanographic]] ([[sonar]]) development. However, the first Cray-2 (serial number 1) was used at the [[NERSC|National Magnetic Fusion Energy Computer Center]] at [[Lawrence Livermore National Laboratory]] for unclassified energy research. It also found its way into civil agencies (such as [[NASA Ames Research Center]]), universities, and corporations worldwide.  For example, [[Ford Motor Company|Ford]] and [[General Motors]] both used the Cray-2 for processing complex [[Finite Element Analysis]] models of car bodyshells, and for performing virtual crash testing of bodyshell components prior to production.

The Cray-2 would have been superseded by the [[Cray-3]], but due to development problems only a single Cray-3 was built and it was never paid for. The spiritual descendant of the Cray-2 is the [[Cray X1]], offered by [[Cray]].

=== Comparison to later computers ===
In 2012, Piotr Luszczek (a former doctoral student of [[Jack Dongarra]]), presented results showing that an [[iPad 2]] matched the historical performance of the Cray-2 on an embedded [[LINPACK]] benchmark.<ref name="iPad2_Cray2">{{Cite web
 |url=https://www.phoronix.com/scan.php?page=news_item&px=MTE4NjU
 |title=Apple iPad 2 As Fast As The Cray-2 Super Computer
 |first=Michael
 |last=Larabel
 |date=16 September 2012
 |accessdate=February 19, 2015
 |archive-date=20 February 2015
 |archive-url=https://web.archive.org/web/20150220054659/http://www.phoronix.com/scan.php?page=news_item&px=MTE4NjU
 |url-status=live
 }}</ref>

==Trivia==
Due to the use of liquid cooling, the Cray-2 was given the nickname "Bubbles", and common jokes around the computer made reference to this unique system.  Gags included "No Fishing" signs, cardboard depictions of the [[Loch Ness Monster]] rising out of the heat exchanger tank, plastic fish inside the exchanger, etc. The power consumption of the Cray-2 was 150–200&nbsp;kW.  Research conducted at the Lawrence Livermore National Laboratory in the early 1990s indicated that to a limited extent the perfluorinated polyether used to cool Cray-2 circuits would break down to form the extremely toxic gas [[perfluoroisobutylene]].<ref>Kwan, J. Kelly, R, Miller G. Presentation at the American Industrial Hygiene Conference, Salt Lake City, UT, May 1991</ref> At the time, Cray had created a poster showing the transparent "bubble chamber" that the cooling fluid was run through for visual effect, with a spill of the same material glistening on the floor—the joke was that if this actually occurred, the facility would have to be evacuated.<ref>Kelly, R. J.,  Personal Experience{{reliable source|date=October 2020}}</ref> The manufacturer of the liquid developed a scrubber that could be placed in line with the pump that would catalytically degrade this toxic breakdown product. 

Each vertical stack of logic modules sat above a stack of power modules which powered 5 volt [[busbar]]s, each of which delivered about 2200 amps.  The Cray-2 was powered by two motor-generators, which took in 480 V [[Three-phase electric power|three-phase]].

==See also==
* [[History of supercomputing]]

==References ==
{{reflist}}

==External links==
{{Commons category}}
*[http://bobodyne.com/web-docs/robots/cray2/ Cray-2 module pictures]
*[http://www.mirrorservice.org/sites/www.bitsavers.org/pdf/cray/CRAY-2/HR-0200-0D_CRAY-2_Computer_Systems_Functional_Description_Jun89.pdf Cray-2 Functional Description Manual]
*[http://www.craysupercomputers.com/downloads/Cray2/Cray2_Brochure001.pdf Cray-2 Brochure]
*Cray-2 Computer System Manuals | National Museum of American History

{{S-start}}
{{S-ach|rec}}
{{S-bef|before=[[Cray X-MP]]/4<br />713 megaflops}}
{{S-ttl
 | title = [[LINPACK|World's most powerful supercomputer]]
 | years = 1985–1987
}}
{{s-aft|after=[[Cray Y-MP]]/832<br />2.144 gigaflops}}
{{S-end}}

{{Cray computers}}

[[Category:Computer-related introductions in 1985]]
[[Category:Cray products|2]]
[[Category:Vector supercomputers]]
[[Category:64-bit computers]]