Canon EF-S lens mount

From Vero - Wikipedia
Jump to navigation Jump to search

Template:Short description Template:Multiple issues

File:Canon EF-S lens mount.jpg
An example of a plastic EF-S lens mount.

The Canon EF-S lens mount is a derivative of the EF lens mount created for some Canon digital single-lens reflex cameras with APS-C sized image sensors. It was released in 2003. Cameras with the EF-S mount are backward compatible with the EF lenses and, as such, have a flange focal distance of 44.0 mm. Such cameras, however, have more clearance, allowing lens elements to be closer to the sensor than in the EF mount. Only Canon cameras released after 2003 with APS-C sized sensors support the EF-S mount.

The "S" in EF-S has variously been described by Canon as coming from either "Small image circle"<ref>Template:Cite web</ref> (the lens projects a smaller image circle than normal EF lenses to match the sensor), or "Short back focus"<ref>Template:Cite web</ref> (the smaller mirror used in APS-C cameras also allows optical elements to protrude further into the camera body, reducing the minimum distance between the sensor and the back element of the lens). The combination of a smaller sensor and shorter back focal length distance enhances the possibilities for wide angle and very wide angle lenses. Such lenses designed for the EF-S mount can be made smaller, lighter (containing less glass), faster (larger aperture) and less expensive.

Although not all Canon EF-S lenses use this short back focal length, they cannot be mounted on DSLRs with sensors larger than APS-C. However, some lenses produced by third-party manufacturers may feature the standard EF mount if they do not have the shorter back focal length but only have a small image circle. Such lenses will give noticeable vignetting or unsharp outer areas if used on a 35mm film or full frame sensor cameras. To a lesser degree, vignetting also occurs with APS-H sensor sizes, such as several (now discontinued) cameras of the 1D series.

Compatibility

The cameras that can use the EF-S mount are: Template:Div col

Template:Div col end

File:Canon EOS 400D.jpg
An EF-S compatible body, the Canon EOS 400D, with open lens mount
File:Canon EF-S camera mount.jpg
An EF-S compatible mount close-up, from the Canon 30D. Note the circular indent inside the mount, which corresponds to the raised ring on the lens.

By design, it is physically impossible to mount EF-S lenses on EF-only cameras. This is because the increased proximity of the lens to the sensor means that on full-frame sensor or 35mm film EF cameras the lens itself would obstruct the mirror's movement and cause damage to the lens and/or camera. While it is possible to modify the lens such that the physical obstruction is removed, allowing for mounting to EF mount cameras, the rear of the lens would still obstruct the mirror. An additional reason is that the lenses produce a smaller image circle of even illumination (circle of no vignetting). An EF-S lens alignment mark is indicated by a small white rectangle, whereas the EF employs a small red dot. The lens will insert into the body when the alignment marks on each are matched, and the lens can then be rotated and locked into the operating position. EF-S camera bodies have both EF-S and EF alignment marks, while EF bodies have only EF marks. Some have reported success attaching EF-S lenses to full-frame bodies with the use of an extension tube; however, this does not eliminate the vignetting problem, and also removes the lens's ability to achieve infinity focus.<ref>Template:Cite web</ref> Also, attachment of EF-S lenses on EF bodies can often be accomplished by removing the small plastic ring seen in the photo above. Although vignetting is still an issue, photos can be taken, and infinity focus achieved. This modification comes with caveats, one being that on some lenses, like the EF-S 10-22mm, at the 10mm setting, the element protrudes too far back toward EF mount camera bodies.

The 10D, D60, D30, and earlier cameras share the EF-only mount with the full frame EOS camera bodies, and also with the APS-H size EOS camera bodies (1D series prior to the 1D X), despite having a smaller sensor and therefore a smaller mirror.

List of EF-S lenses

Template:See also

The EF-S lens mount is a relatively new offering from Canon, so the selection of available lenses is limited compared to the full EF range, but it is backward compatible with the EF mount, and can therefore still accept all EF lenses. The variety of EF-S prime lenses is very limited in comparison to EF-S zoom lenses, with three primes to nine zooms. EF-S lenses are very popular due to their lower cost and zoom lenses are preferred by amateur photographers. Template:As of no EF-S lens has been produced with the "L" designation or with diffractive optics, and only three EF-S prime lenses have been produced.

File:Canon EF and EF-S lens comparison.jpg
EF lens (left) and EF-S lens (right). Note raised ring on EF-S lens.
Focal length Equivalent focal length
(×1.6 crop factor)
Maximum Aperture range Mark Introduced Macro USM STM IS

Template:Anchor

10–18mm 16–28.8 mm Template:F/4.5–5.6 IS STM 2014 Template:No Template:No Template:Yes Template:Yes
10–22mm 16–35.2 mm Template:F/3.5–4.5 USM 2004 Template:No Template:Yes Template:No Template:No
15–85mm 24–136 mm Template:F/3.5–5.6 IS USM 2009 Template:No Template:Yes Template:No Template:Yes
17–55mm 27.2–88 mm Template:F/2.8 IS USM 2006 Template:No Template:Yes Template:No Template:Yes
17–85mm 27.2–136 mm Template:F/4–5.6 IS USM 2004 Template:No Template:Yes Template:No Template:Yes
18–55mm 28.8–88 mm Template:F/3.5–5.6 I 2003 Template:No Template:No Template:No Template:No
I (Jpn.) 2003 Template:No Template:Yes Template:No Template:No
II 2005 Template:No Template:No Template:No Template:No
II (Jpn.) 2005 Template:No Template:Yes Template:No Template:No
III 2011 Template:No Template:No Template:No Template:No
IS 2007 Template:No Template:No Template:No Template:Yes
IS II 2011 Template:No Template:No Template:No Template:Yes
IS STM 2013 Template:No Template:No Template:Yes Template:Yes
Template:F/4–5.6 IS STM 2017 Template:No Template:No Template:Yes Template:Yes
18–135mm 28.8–216 mm Template:F/3.5–5.6 IS 2009 Template:No Template:No Template:No Template:Yes
IS STM 2012 Template:No Template:No Template:Yes Template:Yes
IS USM 2016 Template:No Template:Yes Template:No Template:Yes
18–200mm 28.8–320 mm Template:F/3.5–5.6 IS 2008 Template:No Template:No Template:No Template:Yes
55–250mm 88–400 mm Template:F/4–5.6 IS 2007 Template:No Template:No Template:No Template:Yes
IS II 2011 Template:No Template:No Template:No Template:Yes
IS STM 2013 Template:No Template:No Template:Yes Template:Yes

Template:Anchor

24mm 38.4 mm Template:F/2.8 STM 2014 Template:No Template:No Template:Yes Template:No
35mm 56 mm Template:F/2.8 IS STM 2017 Template:Yes Template:No Template:Yes Template:Yes
60mm 96 mm Template:F/2.8 2005 Template:Yes Template:Yes Template:No Template:No

References

Template:Reflist

Template:Canon EF-S Mount lenses timeline Template:Canon EF lenses

Template:Table of Canon SLR Template:Canon

de:EF-Bajonett#EF-S-Bajonett