Linear Tape-Open
Template:Short description Template:Infobox media
Linear Tape-Open (LTO), also known as the LTO Ultrium format,<ref>Template:Cite web</ref> is a magnetic tape data storage technology used for backup, data archiving, and data transfer. It was originally developed in the late 1990s as an open standards alternative to the proprietary magnetic tape formats available at the time. Upon introduction, LTO rapidly defined the super tape market segment and has consistently been the best-selling super tape format.<ref name="freemanreports-1" /><ref name="freemanreports-2" /> The latest generation as of 2025, LTO-10, can hold Template:Val in one cartridge.<ref>Template:Cite web</ref>
Cartridges contain hundreds of meters of half-inch (12.65 mm) wide tape media wound onto a single reel. The first generation LTO cartridge was released in 2000 and stored Template:Val of data. With each new generation, the capacity has increased, while maintaining the same physical size cartridge.
Mechanisms (a.k.a. tape drives, streamers, transports) extract the tape from the cartridge and spool it up on a second reel in the mechanism, reading or writing data as the tape moves between reels. Robotic libraries exist that can hold hundreds or thousands of LTO cartridges and dozens of mechanisms.
In contrast to other non-tape data storage formats, LTO offers high-capacity removable cartridges with a lower cost per TB and better long term stability. As an overall system, LTO requires significantly less electrical power per TB and includes builtin technologies useful for data interchange and safe-keeping, like LTFS, WORM, encryption and data compression.
Historical context
Half-inch (12.65 mm) wide magnetic tape has been used for data storage since the 1950s, starting with the open reel formats IBM 7-track and later IBM 9-track.
In the mid-1980s, smaller, enclosed, single-reel cartridge formats were developed by IBM and DEC. Although the physical tape was nominally the same width in these new formats and the preceding open-reel formats, the technologies and intended markets were significantly different and there was no compatibility between them. The IBM 3480 tape format was designed to meet the demanding requirements of its mainframe products. DEC's CompacTape was targeted at a broader market, including minicomputers and smaller systems. Later on, it was renamed Digital Linear Tape (DLT) and eventually sold to Quantum Corporation.
In the late 1980s, Exabyte's Data8 format, derived from Sony's dual-reel cartridge 8 mm video format, saw some popularity, especially with UNIX systems. Sony followed this success with their own now-discontinued 8 mm data format, Advanced Intelligent Tape (AIT).
By the late 1990s, Quantum's DLT and Sony's AIT were the leading options for high-capacity tape storage for PC servers and UNIX systems. These technologies were tightly controlled by their owners and consequently, there was little to no competition between vendors and the prices were relatively high.
Birth of LTO
Seeing an opportunity, IBM, HP and Seagate formed the LTO Consortium,<ref>Template:Cite web</ref> which introduced a more open format focusing on the same mid-range market segment.<ref name="Ultrium announcement" /> Much of the technology is an extension of the work done by IBM at its Tucson lab during the previous 20 years.<ref name="IBM storage history" />
In 2000, and around the time of the release of LTO-1, Seagate's magnetic tape division was spun off as Seagate Removable Storage Solutions,<ref>Template:Cite web</ref> renamed Certance in 2003, and subsequently acquired by Quantum in 2004.<ref>Template:Cite web</ref>
Unrealized variations
Initial plans called for two distinct LTO formats: 1) Ultrium - with half-inch tape on a single reel, optimized for high capacity, and 2) Accelis<ref name="Licensing" /> - with 8 mm tape on dual reels, optimized for fast access. Only Ultrium was ever produced, so in common usage, LTO refers to just the Ultrium form factor.
Additionally, the first generation of Ultrium was proposed to be available with 4 different lengths of tape, holding 10 GB, 30 GB, 50 GB, and 100 GB per cartridge.<ref name="EMTEC" /> Only full length cartridges were ever produced.
Generations
As of 2025, ten generations of LTO Ultrium technology have been made available<ref>IBM LTO Tape Drive</ref> and four more are planned.<ref name="auto1">Template:Cite web</ref> Between generations, there are strict compatibility rules that describe how and which drives and cartridges can be used together.
The LTO Consortium publishes a roadmap of future generations, which states that LTO-14 will have a capacity of "up to" 576 TB.<ref name="roadmap1120" /><ref name="lto910" /><ref name="lto78" /> Template:Clear
Key Specifications
| Format | LTO-1 | LTO-2 | LTO-3 | LTO-4 | LTO-5 | LTO-6 | LTO-7 | Type M <ref group="Note">Type M (label id: M8) is an alternate format of an LTO-7 cartridge, not an independent generation. See: Compatibility</ref> | LTO-8 | LTO-9 | LTO-10 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Release date | 2000<ref name="First million">Template:Cite press release</ref> | 2003 | 2005 | 2007 | 2010<ref name="LTO-5" /> | Dec. 2012<ref name="Bechtle" /> | Dec. 2015 <ref name="LTO-7" /><ref name="reglto7b" /><ref name="lto7lic" /> | Dec. 2017 | Sep. 2021<ref>Template:Cite web</ref> | May 2025 | 2026 | |
| Native capacity (uncompressed)<ref group="Note">The units for data capacity and data transfer rates generally follow the "decimal" SI prefix convention (e.g. mega = 106), not the binary interpretation of a decimal prefix (e.g. mega = 220).</ref> | 100 GB | 200 GB | 400 GB | 800 GB | 1.5 TB<ref name="ltfs" /> | 2.5 TB<ref name="lto6pressrelease" /> | 6.0 TB<ref name="lto7lic" /><ref name="ltogenerations" /> | 9 TB | 12 TB<ref name="Ts2280" /> | 18 TB <ref name="lto9rel" /><ref name="ltfs" /><ref name="lto910" /> | 30 TB | 40 TB |
| Advertised capacity (compressed)<ref group="Note">On packaging and in marketing materials, capacities are often stated assuming that data will be compressed at a fixed ratio, commonly 2:1 or 2.5:1.</ref> | 200 GB | 400 GB | 800 GB | 1.6 TB | 3.0 TB | 6.25 TB | 15 TB | 22.5 TB | 30 TB | 45 TB | 75 TB | 100 TB |
| Max speed MB/s (uncompressed)<ref group="Note">This is the maximum data transfer rate between the drive and the tape. See: Data transfer rates</ref> | 20 | 40 | 80 | 120 | 140 | 160 | 300<ref name="reglto7a" /> | 360 | 400 | |||
| Compression capable? | colspan="5" Template:Yes (2:1) | colspan="7" Template:Yes (2.5:1) | ||||||||||
| WORM capable? | colspan="2" Template:No | colspan="5" Template:Yes | Template:No <ref>LTO Type M cartridge (M8)</ref> | colspan="4" Template:Yes | ||||||||
| Encryption capable? | colspan="3" Template:No | colspan="9" Template:Yes | ||||||||||
| LTFS capable? | colspan="4" Template:No | colspan="8" Template:Yes | ||||||||||
| Max. number of partitions | 1 (no partitioning) | 2 | 4 | |||||||||
| <references group="Note" /> | ||||||||||||
Compatibility
In contrast to other tape technologies, an Ultrium cartridge is rigidly defined by a particular generation of LTO technology and cannot be used in any other way (with the exception of LTO-7 Type M, see below). Ultrium drives prior to LTO-10<ref>LTO-10 Breaks the Mold: New Tape Format Sacrifices Compatibility</ref> have some level of compatibility with older generations of cartridges.
| Compatibility | Drives | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LTO-1 | LTO-2 | LTO-3 | LTO-4 | LTO-5 | LTO-6 | LTO-7 | LTO-8 | LTO-9 | LTO-10 | ||||
| Template:Vertical text | LTO-1 | L1 | align="center" Template:Yes | align="center" Template:Yes | align="center" Template:Partial | ||||||||
| LTO-2 | L2 | align="center" Template:Yes | align="center" Template:Yes | align="center" Template:Partial | |||||||||
| LTO-3 | L3 | LT | align="center" Template:Yes | align="center" Template:Yes | align="center" Template:Partial | ||||||||
| LTO-4 | L4 | LU | align="center" Template:Yes | align="center" Template:Yes | align="center" Template:Partial | ||||||||
| LTO-5 | L5 | LV | align="center" Template:Yes | align="center" Template:Yes | align="center" Template:Partial | ||||||||
| LTO-6 | L6 | LW | align="center" Template:Yes | align="center" Template:Yes | |||||||||
| LTO-7 | L7 | LX | align="center" Template:Yes | align="center" Template:Yes | |||||||||
| LTO-7 Type M | M8 | align="center" Template:Yes | |||||||||||
| LTO-8 | L8 | LY | align="center" Template:Yes | align="center" Template:Yes | |||||||||
| LTO-9 | L9 | LZ | align="center" Template:Yes | ||||||||||
| LTO-10 | LA | LH | align="center" Template:Yes | ||||||||||
| Generation | Regular ID |
WORM ID |
|||||||||||
The rules for compatibility between generations of drives and cartridges are as follows:
- Drives of every generation can read and write cartridges of the same generation.
- Drives from generations 2 through 9 can also read and write cartridges of the prior generation.
- Drives from generations 3 through 7 can also read (but not write) cartridges of 2 generations prior.
- Drives from generation 8 can reformat unused cartridges from generation 7 with a special, higher-capacity format (Type M (M8)). Once reformatted as Type M, the cartridge is only compatible with drives from generation 8.
Within the compatibility rules stated above, drives and cartridges from different vendors are expected to be interchangeable. For example, a tape written on any one vendor's drive should be fully readable on any other vendor's drive that is compatible with that generation of LTO.
Core technology
Tape specifications
| Generations | LTO-1 | LTO-2 | LTO-3 | LTO-4 | LTO-5 <ref name="oracle-lto-5"/> | LTO-6 <ref name="oracle-lto6"/> | LTO-7 | LTO-7 Type M (M8) <ref name="auto"/> | LTO-8 <ref name="StoreEver"/> | LTO-9 | LTO-10 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Native capacity | 100 GB | 200 GB | 400 GB | 800 GB | 1.5 TB | 2.5 TB | 6.0 TB | 9.0 TB | 12 TB | 18 TB | 30 TB | 40 TB |
| Tape length | 609 m | 680 m | 820 m | 846 m<ref name="lto6-performance"/> | 960 m | 1035 m<ref name="lto-media"/> | Template:Dunno | |||||
| Tape width | 12.650 mm ± 0.006 mm | |||||||||||
| Tape thickness | 8.9 μm | 8 μm | 6.6 μm | 6.4 μm | 6.4 μm<ref name="oracle-lto6" /> or 6.1 μm (BaFe)<ref name="Fujifilm LTO-6"/> | 5.6 μm | 5.2 μm<ref name="FujiLTO9" /> | Template:Dunno | Template:Dunno | |||
| Magnetic pigment material<ref>Template:Cite web</ref> | Metal particulate (MP) | MP or BaFe<ref name="Imation"/> | BaFe<ref name="HP-BaFe"/><ref name="FujiLTO9">Template:Cite web</ref> | Template:Dunno | ||||||||
| Base material | Polyethylene naphthalate (PEN) | Aramid <ref>Tape keeps kicking, 'breakthrough' 40TB native spec announced — LTO-10 tapes claim up to 100TB compressed data capacity, hold 2.2X more data than previous spec</ref> | ||||||||||
| Data bands per tape | 4 | |||||||||||
| Wraps per band | 12 | 16 | 11 | 14 | 20<ref name="ltfs" /> | 34 | 28 | 42 | 52 | 70 | 118 | |
| Tracks per wrap, read/write elements | 8 | 16<ref name="ltfs" /><ref name="ibm_lto6_announce" /> | 32<ref name="lto7lic"/><ref name="FujiLTO9" /> | |||||||||
| Total tracks | 384 | 512 | 704 | 896 | 1,280 | 2,176<ref name="ibm_lto6_announce"/> | 3,584 | 5,376 | 6,656 | 8,960<ref name="FujiLTO9" /> | 15,104<ref name="lto10pr" /> | |
| Linear density (bits/mm) | 4,880 | 7,398 | 9,638 | 13,250 | 15,142 <ref name="quantum-ug"/> | 15,143<ref name="qlto6-ds"/> | 19,094<ref name="sonylto7"/> | 19,104 | 20,668 | Template:Dunno | Template:Dunno | Template:Dunno |
| Time to write a full tape at max speed (hh:mm) | 1:23 | 1:51 | 3:10 | 4:20 | 5:33 | 8:20 | 9:16 | 12:30 | 20:50 | Template:Dunno | ||
| Encoding | RLL 1,7 | RLL 0,13/11; PRML | RLL 32/33; PRML | RLL 32/33; NPML<ref name="qlto6-ds" /> | Template:Dunno | Template:Dunno | Template:Dunno | |||||
| End-to-end passes required to fill tape | 48 | 64 | 44 | 56 | 80 | 136 | 112 | 168 | 208 | 280 | 472 | Template:Dunno |
| Expected tape durability, end-to-end passes | 9,600<ref name="imation-life"/> | 16,000<ref name="imation-life"/> | 16,000<ref name="imation-life"/> | 11,200<ref name="imation-life"/> | 16,000 <ref name="imation-life"/> | 20,000 | Template:Dunno | Template:Dunno | Template:Dunno | |||
Physical structure
Template:Unreferenced section LTO Ultrium tape is laid out with four wide data bands sandwiched between five narrow servo bands. The tape head assembly, that reads from and writes to the tape, straddles a single data band and the two adjacent servo bands. The tape head has 8, 16, or 32 data read/write head elements and 2 servo read elements. The set of 8, 16, or 32 tracks are read or written in a single, one-way, end-to-end pass that is called a "wrap". The tape head shifts laterally to access the different wraps within each band and also to access the other bands.
Writing to a blank tape starts at band 0, wrap 0, a forward wrap that runs from the beginning of the tape (BOT) to the end of the tape (EOT) and includes a track that runs along one side of the data band. The next wrap written, band 0, wrap 1, is a reverse wrap (EOT to BOT) and includes a track along the other side of the band. Wraps continue in forward and reverse passes, with slight shifts toward the middle of the band on each pass. The tracks written on each pass partially overlap the tracks written on the previous wrap of the same direction, like roof shingles. The back and forth pattern, working from the edges into the middle, conceptually resembles a coiled serpent and is known as linear serpentine recording.
When the first data band is filled (they are filled in 3, 1, 0, 2 order across the tape), the head assembly is moved to the second data band and a new set of wraps is written in the same linear serpentine manner. The total number of tracks on the tape is (4 data bands) × (11 to 52 wraps per band) × (8, 16, or 32 tracks per wrap). For example, an LTO-2 tape has 16 wraps per band, and thus requires 64 passes to fill.
Logical structure
Since LTFS is an open standard, LTFS-formatted tapes are usable by a wide variety of computing systems.
The block structure of the tape is logical so interblock gaps, file marks, tape marks and so forth take only a few bytes each. In LTO-1 and LTO-2, this logical structure has CRC codes and compression added to create blocks of 403,884 bytes. Another chunk of 468 bytes of information (including statistics and information about the drive that wrote the data and when it was written) is then added to create a "dataset". Finally error correction bytes are added to bring the total size of the dataset to 491,520 bytes (480 KiB) before it is written in a specific format across the eight heads. LTO-3 and LTO-4 use a similar format with 1,616,940-byte blocks.<ref name="patent-20090208018"/>
The tape drives use a strong error correction algorithm that makes data recovery possible when lost data is within one track. Also, when data is written to the tape it is verified by reading it back using the read heads that are positioned just "behind" the write heads. This allows the drive to write a second copy of any data that fails the verify without the help of the host system.
Positioning times
While specifications vary between different drives, a typical LTO-7 drive will take about 15 seconds to load the tape and 20 seconds to unload the tape. These drives have an average rewind time of 60 seconds and an average access time (from beginning of tape) of about 56 seconds.<ref name="ibm_drive_performance_specs"/> Because of serpentine writing methods, rewinding often takes less time than the maximum. If a tape is written to full capacity, there is no rewind time, since the last pass is a reverse pass leaving the head at the beginning of the tape (number of tracks ÷ tracks written per pass is always an even number).
Durability
LTO tape is designed for 15 to 30 years of archival storage.<ref name="da-11529"/><ref name="sun.com"/> If tapes are archived for longer than 6 months they have to be stored at a temperature between Template:Convert and between 20 – 50% RH.<ref name="fujifilm-tape-recommendations">Template:Cite web</ref><ref>Template:Cite web</ref> Both drives and media should be kept free from airborne dust or other contaminants from packing and storage materials, paper dust, cardboard particles, printer toner dust etc.<ref name="fujifilm-tape-recommendations" />
Depending on the generation of LTO technology, a single LTO tape should be able to sustain approximately 200-364 full file passes.<ref name="imation-life" /> There is a large amount of lifespan variability in actual use. One full file pass is equal to writing enough data to fill an entire tape and takes between 44 and 208 end-to-end passes. Regularly writing only 50% capacity of the tape results in half as many end-to-end tape passes for each scheduled backup, and thereby doubles the tape lifespan. LTO uses an automatic verify-after-write technology to immediately check the data as it is being written,<ref name="primer3"/><ref name="NewsBytes_June_2011"/> but some backup systems explicitly perform a completely separate tape reading operation to verify the tape was written correctly. This separate verify operation doubles the number of end-to-end passes for each scheduled backup, and reduces the tape life by half.
Optional technology
The original release of LTO technology defined an optional data compression feature. Subsequent generations of LTO have introduced new technologies, including WORM, encryption, and partitioning features. These features are built into the drives and/or tapes and can be ignored or enabled. Compression and encryption can also be performed in software prior to the data being sent to the tape drive. However, the partitioning function can only be done in hardware, and the WORM feature requires special WORM tapes.
Compression
The original LTO specification describes a data compression method LTO-DC, also called Streaming Lossless Data Compression (SLDC).<ref name="SLDC"/><ref name="ECMA-321"/> It is very similar to the algorithm ALDC<ref name="ALDC"/> which is a variation of LZS. LTO-1 through LTO-5 are advertised as achieving a "2:1" compression ratio, while LTO-6 and later generations,<ref name="lto7lic"/> which apply a modified SLDC algorithm using a larger history buffer, are advertised as having a "2.5:1" ratio. This is inferior to slower algorithms such as gzip, but similar to lzop and the high speed algorithms built into other tape drives. The actually achievable ratio generally depends on the compressibility of the data, e.g. for precompressed data such as ZIP files, JPEG images, and MPEG video or audio the ratio will be close to or equal to 1:1.
WORM
New for LTO-3 was write once read many (WORM) capability. This is useful for legal record keeping, and for protection from accidental or intentional erasure, for example from ransomware, or simply human error. Standard LTO cartridges do include a write-protect switch in the bottom-left corner, although it is easily overridden by the user and does not provide any protection from accidental deletion by, for example, misidentification of a cartridge. An LTO-3 or later drive will not erase or overwrite data on a WORM cartridge, but will read it. A WORM cartridge is identical to a normal tape cartridge of the same generation with the following exceptions: the cartridge memory identifies it to the drive as WORM, the servo tracks are slightly different to allow verification that data has not been modified, the bottom half of the cartridge shell is gray,<ref name="PVMatrix"/> and it may come with tamper-proof screws.<ref name="LTO 3 WORM"/> WORM-capable drives immediately recognize WORM cartridges and include a unique WORM ID with every dataset written to the tape. There is nothing different about the tape medium in a WORM cartridge.
Encryption
The LTO-4 specification added a feature to allow LTO-4 drives to encrypt data before it is written to tape.<ref name="LTO-4 encryption"/> All LTO-4 drives must be aware of encrypted tapes, but are not required to support the encryption process. All current LTO manufacturers support encryption natively enabled in the tape drives using Application Managed Encryption (AME). The algorithm used by LTO-4 is AES-GCM, which is an authenticated, symmetric block cipher. The same key is used to encrypt and decrypt data, and the algorithm can detect tampering with the data. Tape drives, tape libraries, and backup software can request and exchange encryption keys using either proprietary protocols, or an open standard like OASIS's Key Management Interoperability Protocol.
Partitioning
The LTO-5 specification introduced the partitioning feature that allows a tape to be divided into two separately writable areas, known as partitions. LTO-6 extends the specification to allow 4 separate partitions. The Linear Tape File System (LTFS) is a self-describing tape format and file system made possible by the partition feature. File data and filesystem metadata are stored in separate partitions on the tape. The metadata, which uses a standard XML schema, is readable by any LTFS-aware system and can be modified separately from the data it describes. The Linear Tape File System Technical Work Group of the Storage Networking Industry Association (SNIA) works on the development of the format for LTFS.<ref name="LTFS"/> Without LTFS, data is generally written to tape as a sequence of nameless "files", or data blocks, separated by "filemarks". Each file is typically an archive of data organized using some variation of tar format or proprietary container formats developed for and used by backup programs. In contrast, LTFS utilizes an XML-based index file to present the copied files as if organized into directories. This means LTFS-formatted tape media can be used similarly to other removable media (USB flash drive, external hard disk drive, and so on). While LTFS can make a tape appear to behave like a disk, it does not change the fundamentally sequential nature of tape. Files are always appended to the end of the tape. If a file is modified and overwritten or removed from the volume, the associated tape blocks used are not freed up: they are simply marked as unavailable, and the used volume capacity is not recovered. Data is deleted and capacity recovered only if the whole tape is reformatted.Template:Citation needed In spite of these disadvantages, there are several use cases where LTFS-formatted tape is superior to disk and other data storage technologies. While LTO seek times can range from 10 to 100 seconds, the streaming data transfer rate can match or exceed disk data transfer rates. Additionally, LTO cartridges are easily transportable and the latest generation can hold more data than other removable data storage formats. The ability to copy a large file or a large selection of files (up to 1.5 TB for LTO-5 or 2.5 TB for LTO-6) to an LTFS-formatted tape, allows easy exchange of data to a collaborator or saving of an archival copy.
Cartridges
Template:As of, 10 generations of data cartridges and 1 type of universal cleaning cartridge have been produced by 6 manufacturers. All LTO Ultrium cartridges are the same size and shape. Humans and robotic libraries can identify the cartridges by barcode labels. Tape drives can identify cartridges by the internal cartridge memory.
-
LTO-2 cartridge with the top shell removed, showing the internal components. Top right corner: tape access gate. Bottom left corner: write-protect-tab. Bottom right corner: cartridge memory chip
-
LTO-3 cartridge with the top shell removed, showing the internal components. Top right corner: write-protect-tab. Bottom left corner: cartridge memory chip. Bottom: tape access gate.
Manufacturers
Throughout the history of the format, there have been six compliance-verified, licensed manufacturers of LTO technology media: EMTEC, Imation, Fujifilm, Maxell, TDK, and Sony.<ref name="ultrium-lto-licensees"/> All other brands of media are (or were) manufactured by these companies under contract. Verbatim<ref name="emtec-imation-verbatim"/> and Quantegy<ref name="fujitsu-quantegy"/> both licensed LTO technology, but never manufactured their own compliance-verified media. Since its bankruptcy in 2003, EMTEC no longer manufactures LTO media products. Imation ended all magnetic tape production in 2011,<ref name="imation-closes-last-tape-plant"/> but continued making cartridges using TDK tape for a while. Maxell produced cartridges up to and including generation 6 in 2012, but has since withdrawn from the market. TDK withdrew from the data tape business in 2014.<ref name="Dissolution"/>
Template:As of, only Fujifilm and Sony continue to manufacture LTO cartridges.<ref name="sony-and-fujifilm"/>
Cartridge Specifications
Cartridges of all generations have the same dimensions, Template:Convert.<ref name="fujifilm-cartridge"/>
Colors
The colors of LTO Ultrium cartridge shells are mostly consistent. HP is the notable exception. Sometimes similar, rather than identical, color names are used by different manufacturers (slate-blue and blue-gray; green, teal, and blue-green; dark red and burgundy).
WORM (write once, read many) cartridges are two-tone: the top half of the shell is the normal color of that generation for that manufacturer, and the bottom half of the shell is a light gray.<ref name="HPE LTO-6 ULTRIUM 6.25TB WORM DATA CARTRIDGE (C7976W)">"Template:Cite web</ref>
Memory
Every LTO cartridge has a cartridge memory (CM) chip inside it, which is used to identify tapes, to discriminate between different LTO generations, and to store tape-use information. This memory can be read or written, one 32-byte block at a time, via a non-contacting passive 13.56 MHz RF interface. The non-contact interface has a range of 20 mm.<ref name="LTO-CM_13.56_MHz"/>
Every LTO drive has a cartridge memory reader in it. External readers are available, both built into tape libraries and PC based. One such reader, Veritape, connects by USB to a PC and integrates with analytical software to evaluate the quality of tapes.<ref name="veritape"/> This device is also rebranded as the Spectra MLM Reader<ref name="Spectra MLM"/> and the Maxell LTO Cartridge Memory Analyzer.<ref name="Maxell-LTO"/> Proxmark3 and other generic RFID readers are also able to read data.<ref name="proxmark"/>
Labels
The LTO cartridge label in tape library applications commonly uses the bar code symbology of USS-39.<ref name="LabelSpecification"/><ref name="Barcode"/> A description and definition is available from the Automatic Identification Manufacturers (AIM) specification Uniform Symbol Specification (USS-39) and the ANSI MH10.8M-1993 ANSI Barcode specification. For LTO labels, there are 6 characters plus an ID code. This identifier is called a VOLSER, for Volume Serial.<ref name="ibm-label-spec"/>
Leader pin
The tape inside an LTO cartridge is wound around a single reel. The end of the tape is attached to a perpendicular leader pin that is used by an LTO drive to reliably grasp the end of the tape and mount it in a take-up reel inside the drive. Older single-reel tape technologies, such as 9-track tape and DLT, used different means to load tape onto a take-up reel. When a cartridge is not in a drive, the pin is held in place at the opening of the cartridge with a small spring. A common reason for a cartridge failing to load into a drive is the misplacement of the leader pin as a result of the cartridge having been dropped. The plastic slot where the pin is normally held is deformed by the drop and the leader pin is no longer in the position that the drive expects it to be.
Erasing
The magnetic servo tracks on the tape are factory encoded. Using a bulk eraser, degaussing, or otherwise exposing the cartridge to a strong magnetic field, will erase the servo tracks along with the data tracks, rendering the cartridge unusable. Erasing the data tracks without destroying the servo tracks can be done with an LTO drive or with special equipment. The erasing head used in these erasers has four magnetic poles that match the width and the location of the data bands. The gaps between the poles correspond to the servo tracks, which are not erased. Tapes erased by this equipment can be recorded again.<ref name="THIC"/>
Cleaning
A Universal Cleaning Cartridge can be used to remove debris from the tape read and write heads in a tape drive. Although keeping a tape drive clean is important, normal cleaning cartridges are abrasive and frequent use will shorten the drive's lifespan. Cleaning cartridge lifespan is usually from 15 to 50 cleanings.<ref name="HPE Cleaning"/>
In addition to keeping the tape drive clean, it is also important to keep the media clean. Debris on the media can be deposited onto drive components that are in contact with the tape. This debris can result in increased media wear which generates more debris. Removing excessive debris from tape can reduce the number of data errors. Cleaning of the media requires special equipment. These cleaners are also used by Spectra Logic to clean new media that is marketed as "CarbideClean" media.<ref name="Certified"/>
Mechanisms
Template:As of, compliance-verified licensed manufacturers of current LTO technology mechanisms are IBM, Hewlett-Packard, and Quantum,<ref name="SL2019"/> although both Hewlett Packard and Quantum have stopped new development of drive mechanisms.<ref name="Outlook 2019"/> The mechanisms, also known as tape drives or streamers, are available in Full-height and Half-height form factors.
Data transfer rates
Minimum and maximum data transfer rates vary by generation and by drive. Half height drives may not attain the same speeds as full-height drives of the same generation.
If data compression (or decompression) is being performed, the average speed between the drive and the computer would be higher than the speed between tape and the drive.
Drives usually support variable-speed operation to dynamically match the data rate flow. This nearly eliminates tape backhitching or "shoe-shining", maximizing overall throughput and device/tape life.<ref name="Speed Matching" />
Cleaning
LTO drives have an internal tape head cleaning brush that is activated when a cartridge is inserted. When a more thorough cleaning is required, the drive signals this on its display and/or via Tape Alert flags.<ref name="tapealert"/>
Libraries
These drives are frequently packaged into external desktop enclosures or carriers that fit into a robotic tape library.
As of 2025, large automated tape libraries are available from IBM,<ref>(IBM) Tape storage solutions</ref> Spectra Logic,<ref>(SpectraLogic) Automated tape libraries</ref> Oracle StorageTek,<ref>(Oracle) StorageTek tape libraries</ref> and Quantum (formerly ADIC).<ref>(Quantum) Scalar Tape Libraries</ref> Smaller libraries and autochangers are available from other vendors too, including many rebranded units originally manufactured by BDT.<ref>BDT Storage Automation</ref> Currently available libraries can hold up to two thousand LTO cartridges in the volume of a typical data center rack.<ref>FUJIFILM: Tape Technology Update March 24, 2025, Presented at Designing Storage Architecture Conference at The Library of Congress. Slide 7</ref> Total storage per unit can exceed tens of Petabytes with I/O rates exceeding hundreds of Terabytes per day.
Sales and market
Template:Timeline of release years In the course of its existence, LTO has succeeded in completely displacing all other low-end/mid-range tape technologies such as AIT, DLT, DAT/DDS, and VXA. And after the exit of Oracle StorageTek T10000 of the high-end market,<ref name="Oracle Support article 2784043_1">Template:Cite web</ref> only the IBM 3592 series and LTO are still under active development. LTO also competes against hard disk drives (HDDs) in some use cases, and its continuous improvement has prevented the predicted "death of tape".<ref name="dying"/>
LTO Sales
Since its inception, over 5 Million LTO drives and 500 EB of media capacity have been sold.<ref>Template:Cite web</ref>
The presence of five certified media manufacturers and four certified mechanism manufacturers for a while produced a competitive market for LTO products. However, Template:As of, there are only two manufacturers developing media, Sony and Fuji, and only IBM is developing mechanisms.
The LTO organization publishes annual media shipments measured in both units and compressed capacity. Media unit shipments peaked in 2008, at about 28 million.<ref name="report-CY17"/> However, the 152.9 Exabytes of total compressed storage capacity shipped in 2023 is the highest ever reported.<ref>LTO Annual Tape report, covering CY'23</ref>
Public information on tape drive sales is not readily available. Units shipped annually peaked at about 800,000 in 2008, but have declined since then to about 400,000 units in 2010,<ref name="market strength"/> and to less than 250,000 by the end of 2018<ref name="spectralogic-evaluation"/>
Comparison to disk storage
For decades, tape storage has primarily been used only in a few special situations, such as with mainframes or for backup and archiving, so the declining cost of disk made it seem possible that disk would completely take over the remaining uses of tape. In spite of this, the continuing evolution of tape technology, and particularly LTO, has kept tape storage relevant.<ref>Quantum: Building a 100 year Archive, Slide 3: "Majority of archival storage is on LTO Tape"</ref><ref>Tape vs. disk storage: Why isn’t tape dead yet?, Curtis Preston, Networkworld</ref>
Comparison to flash storage
SSDs based on flash memory have also been declining in cost and seeing increased usage. A key benefit of SSDs is the fast seek times and data transfer rates, easily besting LTO and disk options. However, LTO never competed in the primary storage space where SSDs excel. In the offline archival storage market, SSDs do not yet compete with LTO in terms of long term stability or low cost per unit of data storage.<ref>Tech Radar: There's one crucial way tape still trounces SSDs and hard drives when it comes to storage...</ref>
See also
- Optical Disc Archive, an optical-based archival format by Sony
- RDX, similar removable disk format for archive purposes
References
External links
- Linear Tape Open Consortium
- IBM's LTO Redbook: IBM System Storage Tape Library Guide for Open Systems
- ECMA-319: Ultrium 1 Format
- IBM LTO Ultrium Cartridge Label Specification, Revision 6
- Template:Commons category-inline
Template:Magnetic tape data formats Template:Ecma International Standards