Earth's mantle
Template:Short description Template:Geophysics
Earth's mantle is a layer of silicate rock between the crust and the outer core. It has a mass of Template:Cvt and makes up 67% of the mass of Earth.<ref name=":02">Template:Cite book</ref> It has a thickness of Template:Convert<ref name=":02" /> making up about 46% of Earth's radius and 84% of Earth's volume. It is predominantly solid but, on geologic time scales, it behaves as a viscous fluid, sometimes described as having the consistency of caramel.<ref>Template:Cite web</ref><ref>Template:Cite web</ref> Partial melting of the mantle at mid-ocean ridges produces oceanic crust, and partial melting of the mantle at subduction zones produces continental crust.<ref>Template:Cite news</ref>
Structure
Rheology
Earth's upper mantle is divided into two major rheological layers: the rigid lithospheric mantle (the uppermost mantle), and the more ductile asthenosphere, separated by the lithosphere-asthenosphere boundary. The lithosphere (that is, the lithospheric mantle and the overlying crust) make up tectonic plates, which move over the asthenosphere. Below the asthenosphere, the mantle is again relatively rigid. Ocean crust lithosphere has a thickness of around Template:Cvt, whereas continental crust lithosphere generally has a thickness of Template:Cvt.<ref>Template:Cite book</ref>
The Earth's mantle is divided into three major layers defined by sudden changes in seismic velocity:<ref>Template:Cite journal</ref>
- the upper mantle (starting at the Moho, or base of the crust around Template:Convert downward to Template:Convert)<ref>The location of the base of the crust varies from approximately Template:Cvt. Oceanic crust is generally less than Template:Cvt thick. "Standard" continental crust is around Template:Cvt thick, and the large crustal root under the Tibetan Plateau is approximately Template:Cvt thick.</ref>
- the transition zone (approximately Template:Convert), in which wadsleyite (≈ Template:Convert) and ringwoodite (≈ Template:Convert) are stable
- the lower mantle (approximately Template:Convert), in which bridgmanite (≈ Template:Convert) and post-perovskite (≈ Template:Convert) are stable
The lower ~200 km of the lower mantle constitutes the D" region (D-double-prime), a region with anomalous seismic properties. This region also contains large low-shear-velocity provinces and ultra low velocity zones.
Mineralogical structure
The top of the mantle is defined by a sudden increase in seismic velocity, which was first noted by Andrija Mohorovičić in 1909; this boundary is now referred to as the Mohorovičić discontinuity or "Moho".<ref name="today's mantle2">Template:Cite web</ref><ref name="moho2">Template:Cite web</ref>
The upper mantle is dominantly peridotite, composed primarily of variable proportions of the minerals olivine, clinopyroxene, orthopyroxene, and an aluminous phase. The aluminous phase is plagioclase in the uppermost mantle, then spinel, and then garnet below ~Template:Cvt.<ref>Template:Cite journal</ref> Gradually through the upper mantle, pyroxenes become less stable and transform into majoritic garnet.<ref>Template:Cite journal</ref>
At the top of the transition zone, olivine undergoes isochemical phase transitions to wadsleyite and ringwoodite. Unlike nominally anhydrous olivine, these high-pressure olivine polymorphs have a large capacity to store water in their crystal structure. This<ref>Template:Cite journal</ref> and other evidence<ref name=hess5_4>Template:Citation</ref> has led to the hypothesis that the transition zone may host a large quantity of water. At the base of the transition zone, ringwoodite decomposes into bridgmanite (formerly called magnesium silicate perovskite), and ferropericlase. Garnet also becomes unstable at or slightly below the base of the transition zone.<ref>Template:Cite journal</ref>
The lower mantle is composed primarily of bridgmanite and ferropericlase, with minor amounts of calcium perovskite, calcium-ferrite structured oxide, and stishovite. In the lowermost ~Template:Cvt of the mantle, bridgmanite isochemically transforms into post-perovskite.<ref>Template:Cite journal</ref>
Possible remnants of Theia collision
Seismic images of Earth’s interior have revealed in the lowermost mantle two continent-sized anomalies with low seismic velocities. These zones are denser and likely compositionally different from the surrounding mantle. These anomalies may represent buried relics of Theia mantle material remaining after the Moon-forming event proposed in the Giant-impact hypothesis. <ref>Yuan, Q., Li, M., Desch, S.J. et al. Moon-forming impactor as a source of Earth’s basal mantle anomalies. Nature 623, 95–99 (2023). https://doi.org/10.1038/s41586-023-06589-1</ref>
Composition
_32.jpg){kind=link}
The chemical composition of the mantle is difficult to determine with a high degree of certainty because it is largely inaccessible. Mantle rocks can become accessible in rare circumstances. For example, rare exposures of mantle rocks occur in ophiolites, where sections of oceanic lithosphere have been obducted onto a continent. Another example is when mantle rocks are sampled as xenoliths within basalts or kimberlites, when fragments of mantle rock become embedded in these rocks during their formation.
| Compound | Mass percent |
|---|---|
| SiO2 | 44.71 |
| MgO | 38.73 |
| FeO | Template:08.18 |
| Al2O3 | Template:03.98 |
| CaO | Template:03.17 |
| Cr2O3 | Template:00.57 |
| NiO | Template:00.24 |
| MnO | Template:00.13 |
| Na2O | Template:00.13 |
| TiO2 | Template:00.13 |
| P2O5 | Template:00.019 |
| K2O | Template:00.006 |
Most estimates of the mantle composition are based on rocks that sample only the uppermost mantle. There is debate as to whether the rest of the mantle, especially the lower mantle, has the same bulk composition.<ref>Template:Cite journal</ref> The mantle's composition has changed through the Earth's history due to the extraction of magma that solidified to form oceanic crust and continental crust.
It has also been proposed in a 2018 study that an exotic form of water known as ice VII can form from supercritical water in the mantle when diamonds containing pressurized water bubbles move upward, cooling the water to the conditions needed for ice VII to form.<ref>Template:Cite news</ref>
Temperature and pressure
In the mantle, temperatures range from approximately 500 kelvin (K) (230 °C; 440 °F) at the upper boundary with the crust to approximately 4,200 K (3,900 °C; 7,100 °F) at the core-mantle boundary.<ref name=":03">Template:Cite book</ref> The temperature of the mantle increases rapidly in the thermal boundary layers at the top and bottom of the mantle, and increases gradually through the interior of the mantle.<ref name="turcotte2">Template:Cite book</ref> Although the higher temperatures far exceed the melting points of the mantle rocks at the surface (about 1,500 K (1,200 °C; 2,200 °F) for representative peridotite), the mantle is almost exclusively solid.<ref name="louie2">Template:Cite web</ref> The enormous lithostatic pressure exerted on the mantle prevents melting, because the temperature at which melting begins (the solidus) increases with pressure.
The pressure in the mantle increases from a few hundred megapascals (MPa) at the Moho to Template:Cvt at the core-mantle boundary.<ref name=":03" />
Movement
Because of the temperature difference between the Earth's surface and outer core and the ability of the crystalline rocks at high pressure and temperature to undergo slow, creeping, viscous-like deformation over millions of years, there is a convective material circulation in the mantle.<ref name="today's mantle2"/> Hot material rises (in a mantle plume) while cooler (and heavier) material sinks downward. Downward motion of material occurs at convergent plate boundaries called subduction zones. Locations on the surface that lie over plumes are predicted to have high elevation (because of the buoyancy of the hotter, less-dense plume beneath) and to exhibit hot spot volcanism. The volcanism often attributed to deep mantle plumes is alternatively explained by passive extension of the crust, permitting magma to leak to the surface: the plate hypothesis.<ref name=Foulger>Template:Cite book</ref>
The convection of the Earth's mantle is a chaotic process (in the sense of fluid dynamics), which is thought to be an integral part of the motion of plates. Plate motion should not be confused with continental drift which applies purely to the movement of the crustal components of the continents. The movements of the lithosphere and the underlying mantle are coupled since descending lithosphere is an essential component of convection in the mantle. The observed continental drift is a complicated relationship between the forces causing oceanic lithosphere to sink and the movements within Earth's mantle.
Although there is a tendency to larger viscosity at greater depth, this relation is far from linear and shows layers with dramatically decreased viscosity, in particular in the upper mantle and at the boundary with the core.<ref name="jena">Walzer, Uwe; Hendel, Roland and Baumgardner, John. Mantle Viscosity and the Thickness of the Convective Downwellings. igw.uni-jena.de</ref> The mantle within about Template:Convert above the core–mantle boundary appears to have distinctly different seismic properties than the mantle at slightly shallower depths; this unusual mantle region just above the core is called DTemplate:Pprime ("D double-prime"), a nomenclature introduced over 50 years ago by the geophysicist Keith Bullen.<ref name="bullen">Template:Cite web</ref> DTemplate:Pprime may consist of material from subducted slabs that descended and came to rest at the core–mantle boundary or from a new mineral polymorph discovered in perovskite called post-perovskite.
Earthquakes at shallow depths are a result of faulting; however, below about Template:Convert the hot, high pressure conditions ought to inhibit further seismicity. The mantle is considered to be viscous and incapable of brittle faulting. However, in subduction zones, earthquakes are observed down to Template:Convert. A number of mechanisms have been proposed to explain this phenomenon, including dehydration, thermal runaway, and phase change. The geothermal gradient can be lowered where cool material from the surface sinks downward, increasing the strength of the surrounding mantle, and allowing earthquakes to occur down to a depth of between Template:Convert and Template:Convert.<ref>Template:Citation</ref>
The pressure at the bottom of the mantle is ~Template:Cvt.<ref name="burns"> Template:Cite book </ref> Pressure increases as depth increases, since the material beneath has to support the weight of all the material above it. The entire mantle, however, is thought to deform like a fluid on long timescales, with permanent plastic deformation accommodated by the movement of point, line, and/or planar defects through the solid crystals composing the mantle. Estimates for the viscosity of the upper mantle range between Template:Val and Template:Val pascal seconds (Pa·s) depending on depth,<ref name="jena" /> temperature, composition, state of stress, and numerous other factors. Thus, the upper mantle can only flow very slowly. However, when large forces are applied to the uppermost mantle it can become weaker, and this effect is thought to be important in allowing the formation of tectonic plate boundaries.<ref>Template:Cite book</ref>
Exploration
Exploration of the mantle is generally conducted at the seabed rather than on land because of the relative thinness of the oceanic crust as compared to the significantly thicker continental crust.
The first attempt at mantle exploration, known as Project Mohole, was abandoned in 1966 after repeated failures and cost over-runs. The deepest penetration was approximately Template:Convert. In 2005 an oceanic borehole reached Template:Convert below the sea floor from the ocean drilling vessel JOIDES Resolution.
More successful was the Deep Sea Drilling Project (DSDP) that operated from 1968 to 1983. Coordinated by Scripps Institution of Oceanography at the University of California, San Diego, DSDP provided crucial data to support the seafloor spreading hypothesis and helped to prove the theory of plate tectonics. Glomar Challenger conducted the drilling operations. DSDP was the first of three international scientific ocean drilling programs that have operated over more than 40 years. Scientific planning was conducted under the auspices of the Joint Oceanographic Institutions for Deep Earth Sampling (JOIDES), whose advisory group consisted of 250 distinguished scientists from academic institutions, government agencies, and private industry from all over the world. The Ocean Drilling Program (ODP) continued exploration from 1985 to 2003 when it was replaced by the Integrated Ocean Drilling Program (IODP).<ref name="about">Template:Cite web</ref>
On 5 March 2007, a team of scientists on board the RRS James Cook embarked on a voyage to an area of the Atlantic seafloor where the mantle lies exposed without any crust covering, midway between the Cape Verde Islands and the Caribbean Sea. The exposed site lies approximately three kilometres beneath the ocean surface and covers thousands of square kilometres.<ref>Template:Cite news</ref><ref>Template:Cite news</ref> A relatively difficult attempt to retrieve samples from the Earth's mantle was scheduled for later in 2007.<ref name="chikyu">Template:Cite news</ref> The Chikyu Hakken mission attempted to use the Japanese vessel Chikyū to drill up to Template:Convert below the seabed. This is nearly three times as deep as preceding oceanic drillings.
A novel method of exploring the uppermost few hundred kilometres of the Earth was proposed in 2005, consisting of a small, dense, heat-generating probe which melts its way down through the crust and mantle while its position and progress are tracked by acoustic signals generated in the rocks.<ref>Ojovan M.I., Gibb F.G.F., Poluektov P.P., Emets E.P. 2005. Probing of the interior layers of the Earth with self-sinking capsules. Atomic Energy, 99, 556–562</ref> The probe consists of an outer sphere of tungsten about one metre in diameter with a cobalt-60 interior acting as a radioactive heat source. It was calculated that such a probe will reach the oceanic Moho in less than 6 months and attain minimum depths of well over Template:Convert in a few decades beneath both oceanic and continental lithosphere.<ref>Ojovan M.I., Gibb F.G.F. "Exploring the Earth's Crust and Mantle Using Self-Descending, Radiation-Heated, Probes and Acoustic Emission Monitoring". Chapter 7. In: Nuclear Waste Research: Siting, Technology and Treatment, Template:ISBN, Editor: Arnold P. Lattefer, Nova Science Publishers, Inc. 2008</ref>
Exploration can also be aided through computer simulations of the evolution of the mantle. In 2009, a supercomputer application provided new insight into the distribution of mineral deposits, especially isotopes of iron, from when the mantle developed 4.5 billion years ago.<ref name="davis">University of California – Davis (2009-06-15). Super-computer Provides First Glimpse Of Earth's Early Magma Interior. ScienceDaily. Retrieved on 2009-06-16.</ref>
In 2023, JOIDES Resolution recovered cores of what appeared to be rock from the upper mantle after drilling only a few hundred meters into the Atlantis Massif. The borehole reached a maximum depth of 1,268 meters and recovered 886 meters of rock samples consisting of primarily peridotite. There is debate over the extent to which the samples represent the upper mantle with some arguing the effects of seawater on the samples situates them as examples of deep lower crust. However, the samples offer a much closer analogue to mantle rock than magmatic xenoliths as the sampled rock never melted into magma or recrystallized.<ref>Template:Cite report</ref>
See also
- Internal structure of Earth
- Large low-shear-velocity provinces
- Mantle (geology) – a wider description of the mantle of Earth and other astronomical bodies
- Seismic tomography – technique for imaging the subsurface of Earth using seismic waves
References
External links
- The Biggest Dig: Japan builds a ship to drill to the earth's mantle – Scientific American (September 2005)
- Information on the Mohole Project