The estimated cost for the project was Template:INRConvert. It was intended to survey the lunar surface for over two years, to produce a complete map of the chemical composition at the surface and its three-dimensional topography. The polar regions were of special interest as there was a high chance of finding water ice.<ref>Template:Cite web</ref><ref>Template:Cite journal</ref> One of its many achievements was the discovery of the widespread presence of water molecules in lunar soil.<ref name="auto5">Template:Cite web</ref>
After almost a year, the orbiter started experiencing several technical issues including failure of the star tracker and poor thermal shielding; Chandrayaan-1 stopped communicating at about 20:00 UTC on 28 August 2009, shortly after which the ISRO officially declared that the mission was over. Chandrayaan-1 operated for 312 days as opposed to the intended two years; however, the mission achieved most of its scientific objectives, including detecting the presence of Lunar water.<ref name="mission_end_1">Template:Cite news</ref><ref name="mission_end_2">Template:Cite news</ref><ref name="mission_end_3">Template:Cite news</ref><ref name="nasa_chandrayaan">Template:Cite web</ref>
On 2 July 2016, NASA used ground-based radar systems to relocate Chandrayaan-1 in its lunar orbit, almost seven years after it shut down.<ref name="cnn20170310">Template:Cite news</ref><ref name="nasa20170309">Template:Cite web</ref> Repeated observations over the next three months allowed a precise determination of its orbit which varies between Template:Convert in altitude every two years.<ref>Template:Cite web</ref>
Former Prime Minister of India, Atal Bihari Vajpayee, announced the Chandrayaan 1 project<ref>Template:Cite web</ref> The mission was a major boost to India's space program.<ref name="Bagla">Template:Cite news</ref> The idea of an Indian scientific mission to the Moon was first raised in 1999 during a meeting of the Indian Academy of Sciences. The Astronautical Society of India (ASI) began planning the implementation of such an idea in 2000. Soon after, the Indian Space Research Organisation (ISRO) set up the National Lunar Mission Task Force. The Task Force decided that the ISRO had the technical expertise to carry out an Indian mission to the Moon. In April 2003, over 100 Indian scientists spanning fields from planetary science, space sciences, Earth sciences, physics, chemistry, astronomy, astrophysics, engineering, and communication sciences discussed and approved the Task Force recommendation to launch an Indian probe to the Moon. Six months later, in November, the Vajpayee government formally approved the mission.<ref name="auto5"/><ref>Template:Cite web</ref>
Objectives
The mission had the following objectives:<ref>Template:Cite web</ref>
To design, develop, launch, and orbit a spacecraft around the Moon using an Indian-made launch vehicle
To conduct scientific experiments using instruments on the spacecraft which would yield data:
for the preparation of a three-dimensional atlas (with high spatial and altitude resolution of Template:Convert) of both the near and far sides of the Moon
To test the impact of a sub-satellite (Moon Impact Probe – MIP) on the surface of the Moon as a forerunner for future soft-landing missions
Goals
To reach its objective, the mission defined these goals:
High-resolution mineralogical and chemical imaging of the permanently shadowed north- and south-polar regions
To search for surface or subsurface lunar water ice, especially at the lunar poles
Identification of chemicals in lunar highland rocks
Chemical stratigraphy of the lunar crust by remote sensing of the central uplands of large lunar craters, and of the South Pole Aitken Region (SPAR), an expected site of interior material
Mapping the height variation of features of the lunar surface
Observation of X-ray spectrum greater than 10 keV and stereographic coverage of most of the Moon's surface with Template:Convert resolution
X band, Template:Convert diameter dual gimballed parabolic antenna for payload data transmission. The Telemetry, Tracking & Command (TTC) communication operated in S band frequency.
The spacecraft used a bipropellant integrated propulsion system to reach lunar orbit as well as orbit and altitude maintenance while orbiting the Moon. The power plant consisted of one 440 Newton(N) engine and eight 22 N thrusters. Fuel and oxidizer were stored in two tanks of Template:Convert each.<ref name="description " /><ref name="FAQ " />
Navigation and control
The craft was 3-axis stabilized with two star sensors, gyros, and four reaction wheels. The spacecraft carried dual redundant bus management units for attitude control, sensor processing, antenna orientation, etc.<ref name="description " /><ref name="FAQ " />
Payload
The scientific payload had a mass of Template:Convert. The payload contained five Indian instruments and six instruments from other countries.
Indian instruments
TMC or the Terrain Mapping Camera was a CMOS camera with Template:Convert resolution and a Template:Convert swath in the panchromatic band and was used to produce a high-resolution map of the Moon.<ref>Template:Cite journal</ref> This instrument aimed to completely map the topography of the Moon. The camera works in the visible region of the electromagnetic spectrum and captures black-and-white stereo images. When used in conjunction with data from the Lunar Laser Ranging Instrument (LLRI), it can help in a better understanding of the lunar gravitational field as well. TMC was built by the ISRO's Space Applications Centre (SAC) at Ahmedabad.<ref>Template:Cite web</ref> The TMC was tested on 29 October 2008 through a set of commands issued from ISTRAC.<ref name="ISRO TMC">Template:Cite web</ref>
HySI or Hyper Spectral Imager is a CMOS camera, that performs mineralogical mapping in the 400–900 nm band with a spectral resolution of 15 nm and a spatial resolution of Template:Convert.
LLRI or Lunar Laser Ranging Instrument determines the height of the surface topography by sending pulses of infraredlaser light toward the lunar surface and detecting the reflected portion of that light. It operated continuously and collected 10 measurements per second on both the day and night sides of the Moon. LLRI was developed by the Laboratory for Electro-Optics Systems of ISRO, Bangalore.<ref name="ISRO LLRI">Template:Cite web</ref> It was tested on 16 November 2008.<ref name="ISRO LLRI" /><ref name="Hindu LLRI">Template:Cite news</ref>
HEX is a High Energy aj/gamma x-ray spectrometer for 30–200 keV measurements with a ground resolution of Template:Convert, the HEX measured Uranium, Thorium, Lead-210, Radon-222 degassing, and other radioactive elements.
MIP or the Moon Impact Probe developed by the ISRO is an impact probe that consists of a C-band Radar altimeter for measurement of the altitude of the probe, a video imaging system for acquiring images of the lunar surface, and a mass spectrometer for measuring the constituents of the lunar atmosphere.<ref>Template:Cite web</ref> It was ejected at 14:30 UTC on 14 November 2008. As planned, the Moon Impact Probe impacted the lunar south pole at 15:01 UTC on 14 November 2008. ISRO was the fifth national space agency to reach the surface of the Moon. Other national space agencies to have done so prior were the former Soviet Union in 1959,<ref name="auto4"/> the United States in 1962,<ref name="auto3"/> Japan in 1993,<ref name="auto2"/> and ESA in 2006.<ref name="auto"/><ref name="TOI"/><ref name="auto1"/>
Instruments from other countries
Moon Mineralogy Mapper (left)SIR-2 Logo
These international contributions were vital to the mission’s success and overall achievements of Chandrayaan 1.
RADOM-7, Radiation Dose Monitor Experiment from the Bulgarian Academy of Sciences mapped the radiation environment around the Moon.<ref name="ISRO RADOM1">Template:Cite web</ref> It was tested on 16 November 2008.<ref name="ISRO LLRI" /><ref name="Hindu LLRI" />
During the tenure of Prime Minister Manmohan Singh, the Chandrayaan project got a boost and finally Chandrayaan-1 was launched on 22 October 2008 at 00:52 UTC from Satish Dhawan Space Centre using the ISRO's Template:Convert tall, four-stage PSLV C11 launch vehicle.<ref>Template:Cite web</ref> Chandrayaan-1 was sent to the Moon in a series of orbit-increasing manoeuvres around the Earth over a period of 21 days as opposed to launching the craft on a direct trajectory to the Moon.<ref name="HinduOrbits">Template:Cite news</ref> At launch the spacecraft was inserted into geostationary transfer orbit (GTO) with an apogee of Template:Convert and a perigee of Template:Convert. The apogee was increased with a series of five orbit burns conducted over a period of 13 days after launch.<ref name="HinduOrbits" />
For the duration of the mission, ISRO's telemetry, tracking and command network (ISTRAC) at Peenya in Bangalore, tracked and controlled Chandrayaan-1.<ref name="Chandrayaan-1 successfully put into Earth's orbit">Template:Cite news</ref> Scientists from India, Europe, and the U.S. conducted a high-level review of Chandrayaan-1 on 29 January 2009 after the spacecraft completed its first 100 days in space.<ref>Template:Cite news</ref>
Earth orbit burns
Earth orbit burns
Date (UTC)
Burn time (minutes)
Resulting apogee
22 October Launch
18.2 in four stages
22,860 km
23 October
18
37,900 km
25 October
16
74,715 km
26 October
9.5
164,600 km
29 October
3
267,000 km
4 November
2.5
380,000 km
First orbit burn
The first orbit-raising manoeuvre of the Chandrayaan-1 spacecraft was performed at 03:30 UTC on 23 October 2008 when the spacecraft's 440 Newton liquid engine was fired for about 18 minutes by commanding the spacecraft from Spacecraft Control Centre (SCC) at ISRO Telemetry, Tracking and Command Network (ISTRAC). With this Chandrayaan-1's apogee was raised to Template:Convert, and its perigee to Template:Convert. In this orbit, the Chandrayaan-1 spacecraft took about 11 hours to go around the Earth once.<ref>Template:Cite web</ref>
Second orbit burn
The second orbit-raising manoeuvre of Chandrayaan-1 spacecraft was carried out on 25 October 2008 at 00:18 UTC when the spacecraft's engine was fired for about 16 minutes, raising its apogee to Template:Convert, and its perigee to Template:Convert, completing 20 percent of its journey. In this orbit, Chandrayaan-1 spacecraft took about twenty-five and a half hours to go round the Earth once. This was the first time an Indian spacecraft went beyond the Template:Convert high geostationary orbit and reached an altitude more than twice that height.<ref name="ISRO 2 orb">Template:Cite web</ref>
Third orbit burn
The third orbit raising manoeuvre was initiated on 26 October 2008 at 01:38 UTC when the spacecraft's engine was fired for about nine and a half minutes. With this its apogee was raised to Template:Convert, and the perigee to Template:Convert. In this orbit, Chandrayaan-1 took about 73 hours to go around the Earth once.<ref name="ISRO 3 orb">Template:Cite web</ref>
Fourth orbit burn
The fourth orbit-raising maneuver took place on 29 October 2008 at 02:08 UTC when the spacecraft's engine was fired for about three minutes, raising its apogee to Template:Convert and the perigee to Template:Convert. This extended its orbit to a distance more than half the way to the Moon. In this orbit, the spacecraft took about six days to go around the Earth once.<ref name="ISRO 4 orb">Template:Cite web</ref>
Final orbit burn
The fifth and final orbit raising manoeuvre was carried out on 3 November 2008 at 23:26 UTC when the spacecraft's engine was fired for about two and a half minutes resulting in Chandrayaan-1 entering the Lunar Transfer Trajectory with an apogee of about Template:Convert.<ref name="ISRO 5 orb">Template:Cite web</ref>
Lunar orbit insertion
Lunar orbit insertion
Date (UTC)
Burn time (seconds)
Resulting periselene
Resulting aposelene
8 November
817
504 km
7,502 km
9 November
57
200 km
7,502 km
10 November
866
187 km
255 km
11 November
31
101 km
255 km
12 November Final orbit
100 km
100 km
Chandrayaan-1 completed the lunar orbit insertion operation on 8 November 2008 at 11:21 UTC. This manoeuvre involved firing of the liquid engine for 817 seconds (about thirteen and half minutes) when the spacecraft passed within Template:Convert from the Moon. The satellite was placed in an elliptical orbit that passed over the polar regions of the Moon, with Template:Convertaposelene and Template:Convertperiselene. The orbital period was estimated to be around 11 hours. With the successful completion of this operation, India became the fifth nation to put a vehicle in lunar orbit.<ref name="ISRO 6 LOI">Template:Cite web</ref>
First orbit reduction
First Lunar Orbit Reduction Manoeuvre of Chandrayaan-1 was carried out on 9 November 2008 at 14:33 UTC. During this, the engine of the spacecraft was fired for about 57 seconds. This reduced the periselene to Template:Convert while aposelene remained unchanged at 7,502 km. In this elliptical orbit, Chandrayaan-1 took about ten and a half hours to circle the Moon once.<ref name="ISRO 8 LOR">Template:Cite web</ref>
Second orbit reduction
This manoeuvre was carried out on 10 November 2008 at 16:28 UTC, resulting in a steep decrease in Chandrayaan-1's aposelene to Template:Convert and its periselene to Template:Convert, During this manoeuvre, the engine was fired for about 866 seconds (about fourteen and a half minutes). Chandrayaan-1 took two hours and 16 minutes to go around the Moon once in this orbit.<ref name="HINDU 8 LOR">Template:Cite news</ref>
Third orbit reduction
Third Lunar Orbit Reduction was carried out by firing the onboard engine for 31 seconds on 11 November 2008 at 13:00 UTC. This reduced the periselene to Template:Convert, while the aposelene remained constant at 255 km. In this orbit Chandrayaan-1 took two hours and 9 minutes to go around the Moon once.<ref name="HINDU 9 LOR">Template:Cite news</ref>
Final orbit
Chandrayaan-1 spacecraft was placed into a mission-specific lunar polar orbit of Template:Convert above the lunar surface on 12 November 2008.<ref name="jsr603">Template:Cite web</ref><ref name="ISRO 8 FOR">Template:Cite web</ref> In the final orbit reduction manoeuvre, Chandrayaan-1's aposelene and periselene were both reduced to 100 km.<ref name="ISRO 8 FOR" /> In this orbit, Chandrayaan-1 takes about two hours to go around the Moon once. Two of the 11 payloads—the Terrain Mapping Camera (TMC) and the Radiation Dose Monitor (RADOM)—were switched on. The TMC acquired images of both the Earth and the Moon.<ref name="ISRO 8 FOR" />
Impact of the MIP on the lunar surface
The Moon Impact Probe (MIP) crash-landed on the lunar surface on 14 November 2008, 15:01 UTC near the crater Shackleton at the south pole.<ref name="jsr603" /> The MIP was one of eleven scientific instruments (payloads) on board Chandrayaan-1.<ref name="Times of India">Template:Cite news</ref>
The MIP separated from Chandrayaan at 100 km from the lunar surface and began its nosedive at 14:36 UTC, going into free fall for thirty minutes.<ref name="jsr603" /> As it fell, it kept sending information back to the mother satellite which, in turn, beamed the information back to Earth. The altimeter then also began recording measurements to prepare for a rover to land on the lunar surface during a second Moon mission.<ref name="UMMID">Template:Cite news</ref>
Following the deployment of the MIP, the other scientific instruments were turned on, starting the next phase of the mission.<ref name="Times of India" />
After scientific analyses of the received data from the MIP, the Indian Space Research Organisation confirmed the presence of water in the lunar soil and published the finding in a press conference addressed by its then Chairman G. Madhavan Nair.
Rise of spacecraft's temperature
ISRO had reported on 25 November 2008 that Chandrayaan-1's temperature had risen above normal to Template:Convert,<ref name="BBC-HiTemp">Template:Cite news</ref> Scientists said that it was caused by higher than expected temperatures in lunar orbit.<ref name="BBC-HiTemp" /> The temperature was brought down by about Template:Convert by rotating the spacecraft about 20 degrees and switching off some of the instruments.<ref name="BBC-HiTemp" /> Subsequently, ISRO reported on 27 November 2008 that the spacecraft was operating under normal temperature conditions.<ref name="TOI-HiTemp">Template:Cite news</ref> In subsequent reports ISRO says, since the spacecraft was still recording higher than normal temperatures, it would be running only one instrument at a time until January 2009 when lunar orbital temperature conditions are said to stabilize.<ref name="ET-HiTemp">Template:Cite news</ref> It was initially thought that the spacecraft was experiencing high temperature because of radiation from the Sun and infrared radiation reflected by the Moon.<ref name="NS-HiTemp">Template:Cite news</ref> However the rise in spacecraft temperature was later attributed to a batch of DC-DC converters with poor thermal regulation.<ref>Template:Cite web</ref><ref>Template:Cite news</ref>
Mapping of minerals
The mineral content on the lunar surface was mapped with the Moon Mineralogy Mapper (M3), a NASA instrument on board the orbiter. The presence of iron was reiterated and changes in rock and mineral composition have been identified. The Oriental Basin region of the Moon was mapped, and it indicates abundance of iron-bearing minerals such as pyroxene.<ref name="M3-mapping">Template:Cite news</ref>
In 2018 it was announced that M3 infrared data had been re-analyzed to confirm the existence of water across wide expanses of the Moon's polar regions.<ref name=":0">Template:Cite news</ref>
Mapping of Apollo landing sites
ISRO announced in January 2009 the completion of the mapping of the Apollo Moon missions landing sites by the orbiter, using multiple payloads. Six of the sites have been mapped, including the landing sites of Apollo 15 and Apollo 17.<ref>Template:Cite web</ref>
Image acquisition
The craft completed 3,000 orbits acquiring 70,000 images of the lunar surface,<ref name="sensor_obj_1">Template:Cite news</ref><ref name="sensor_obj_2">Template:Cite web</ref><ref name="sensor_obj_3">Template:Cite news</ref> which is quite a record compared to the lunar flights of other nations. ISRO officials estimated that if more than 40,000 images have been transmitted by Chandrayaan's cameras in 75 days, it worked out to nearly 535 images being sent daily. They were first transmitted to Indian Deep Space Network at Byalalu near Bangalore, from where they were flashed to ISRO's Telemetry Tracking And Command Network (ISTRAC) at Bangalore.
Some of these images have a resolution of down to Template:Convert, providing a sharp and clear picture of the Moon's surface, while many images sent by some of the other missions had a 100-metre resolution.<ref>Template:Cite web</ref> For comparison, the Lunar Reconnaissance Orbiter Camera has a 0.5 meter resolution.<ref>Template:Cite web</ref>
On 26 November, the Terrain Mapping Camera, which was first activated on 29 October 2008, acquired images of peaks and craters. This came as a surprise to ISRO officials because the Moon consists mostly of craters.<ref name="TOI-TMC-images">Template:Cite news</ref>
On 25 March 2009 Chandrayaan beamed back its first images of the Earth in its entirety. These images were taken with the TMC. Previous imaging was done on only one part of the Earth. The new images show Asia, parts of Africa and Australia with India being in the centre.<ref name="Full-Image">Template:Cite news</ref><ref>Template:Cite web</ref>
Orbit raised to 200 km
After the completion of all the major mission objectives, the orbit of Chandrayaan-1 spacecraft, which had been at a height of Template:Convert from the lunar surface since November 2008, was raised to Template:Convert. The orbit-raising manoeuvres were carried out between 03:30 and 04:30 UTC on 19 May 2009. The spacecraft at this higher altitude enabled further studies on orbit perturbations and gravitational field variation of the Moon and also enabled imaging of the lunar surface with a wider swath.<ref name="ISRO_May2009:">Template:Cite web</ref> It was later revealed that the true reason for the orbit change was that it was an attempt to keep the temperature of the probe down.<ref name="Newscientist-Sept09">"Moon's heat hastened Indian probe's demise"Template:Webarchive, New Scientist, 12 September 2009, p. 5.</ref> It was "...assumed that the temperature [of the spacecraft subsystems] at 100 km above the Moon's surface would be around 75 degrees Celsius. However, it was more than 75 degrees and problems started to surface. We had to raise the orbit to 200 km."<ref name=TimesofINdia_Sept09>Template:Cite news</ref>
Attitude sensor failure
The star tracker, a device used for pointing attitude determination (orientation), failed in orbit after nine months of operation. Afterward, the orientation of Chandrayaan was determined using a back-up procedure using a two-axis Sun sensor and taking a bearing from an Earth station. This was used to update three axis gyroscopes which enabled spacecraft operations.<ref name="sensor_obj_1" /><ref name="sensor_obj_2" /><ref name="sensor_obj_3" /> The second failure, detected on 16 May, was attributed to excessive radiation from the Sun.<ref>Template:Cite news</ref>
The Mini-SAR has imaged many of the permanently shadowed regions that exist at both poles of the Moon.<ref name='additional evidence'>Template:Cite news</ref> In March 2010, it was reported that the Mini-SAR on board the Chandrayaan-1 had discovered more than 40 permanently darkened craters near the Moon's north pole which are hypothesized to contain an estimated 600 million metric tonnes of water-ice.<ref name='additional evidence' /><ref name="BBC2Mar2010">"Ice deposits found at Moon's pole"Template:Webarchive, BBC News, 2 March 2010</ref> The radar's high CPR is not uniquely diagnostic of either roughness or ice; the science team must take into account the environment of the occurrences of high CPR signal to interpret its cause. The ice must be relatively pure and at least a couple of meters thick to give this signature.<ref name='additional evidence' /> The estimated amount of water ice potentially present is comparable to the amount estimated from the previous mission of Lunar Prospector's neutron data.<ref name='additional evidence' />
Although the results are consistent with recent findings of other NASA instruments onboard Chandrayaan-1 (the Moon Mineralogy Mapper (MP3) discovered water molecules in the Moon's polar regions, while water vapour was detected by NASA's Lunar Crater Observation and Sensing Satellite, or LCROSS<ref name='additional evidence' />) this observation is not consistent with the presence of thick deposits of nearly pure water ice within a few meters of the lunar surface, but it does not rule out the presence of small (<~10cm), discrete pieces of ice mixed in with the regolith.<ref>Template:Cite journal</ref>
End of the mission
The mission was expected to operate for two years. However, around 20:00 UTC on 28 August 2009 communication with the spacecraft was suddenly lost. The probe had operated for 312 days. The craft had been expected to remain in orbit for approximately another 1000 days and to crash into the lunar surface in late 2012,<ref>Chandrayaan-1 off radar, but will work for 1000 daysTemplate:Webarchive. The Economic Times 21 September 2009.</ref> although in 2016 it was found to still be in orbit.<ref name="nasa20170309" />
A member of the science advisory board of Chandrayaan-1 said that it is difficult to ascertain reasons for the loss of contact.<ref name="Stoday">Template:Cite web</ref> ISRO Chairman G. Madhavan Nair said that due to very high radiation, power-supply units controlling both the computer systems on board failed, snapping the communication connectivity.<ref name="TheHindu">Chandrayaan-1 mission terminated The Hindu. 31 August 2009.</ref> However, information released later showed that the power supply supplied by MDI failed due to overheating.<ref name="Newscientist-Sept09" /><ref name="TimesofINdia_Sept09" /><ref>Power supply glitch partially cripples Insat-4BTemplate:Webarchive, HinduBusiness Line, Retrieved 13 July 2010.</ref>
Although the mission was less than 10 months in duration, and less than half the intended two years in length,<ref name="Bagla " /><ref name="TheHindu" /><ref name="termination">Template:Cite web</ref> a review by scientists termed the mission successful, as it had completed 95% of its primary objectives.
Results
Chandrayaan's NASA Instrument Moon Mineralogy Mapper has confirmed the magma ocean hypothesis, meaning that the Moon was once completely molten.<ref>Template:Cite news</ref> The terrain mapping camera (TMC) on board Chandrayaan-1, besides producing more than 70,000 three dimensional images, has recorded images of the landing site of U.S. spacecraft Apollo 15.<ref>Template:Cite news</ref><ref>Template:Cite news</ref>
The TMC and HySI payloads of ISRO have covered about 70% of the lunar surface, while M3 covered more than 95% of the same and SIR-2 has provided high-resolution spectral data on the mineralogy of the Moon.Template:Citation needed
Indian Space Research Organisation said interesting data on lunar polar areas was provided by Lunar Laser Ranging Instrument (LLRI) and High Energy X-ray Spectrometer (HEX) of ISRO as well as Miniature Synthetic Aperture Radar (Mini-SAR) of the US.<ref name=":1">Template:Cite news</ref>
The LLRI covered both the lunar poles and additional lunar regions of interest, HEX made about 200 orbits over the lunar poles and Mini-SAR provided complete coverage of both North and South Polar Regions of the Moon.<ref name=":1" />
Another ESA payload – Chandrayaan-1 imaging X-ray Spectrometer (C1XS) – detected more than two dozen weak solar flares during the mission duration. The Bulgarian payload called Radiation Dose Monitor (RADOM) was activated on the day of the launch itself and worked until the mission's end.<ref name=":1" />
ISRO said scientists from India and participating agencies expressed satisfaction on the performance of Chandrayaan-1 mission as well as the high quality of data sent by the spacecraft.<ref name=":1" />
They have started formulating science plans based on the data sets obtained from the mission. It is expected that in the next few months, interesting results about lunar topography, mineral and chemical contents of the Moon and related aspects are expected to be published.<ref>Template:Cite news</ref>
The Chandrayaan-1 payload has enabled scientists to study the interaction between the solar wind and a planetary body like the Moon without a magnetic field.<ref>Template:Cite news</ref>
In its 10-month orbit around the Moon, Chandrayaan-1's X-ray Spectrometer (C1XS) detected titanium, confirmed the presence of calcium, and gathered the most accurate measurements yet of magnesium, aluminium and iron on the lunar surface.<ref>Template:Cite news</ref>
On 18 November 2008, the Moon Impact Probe was released from Chandrayaan-1 at a height of Template:Convert. During its 25 minute descent, Chandra's Altitudinal Composition Explorer (CHACE) recorded evidence of water in 650 mass spectra readings gathered during this time.<ref>Template:Cite web</ref> On 24 September 2009 Science journal reported that the NASA Instrument Moon Mineralogy Mapper (M3) on Chandrayaan-1 had detected water ice on the Moon.<ref>Template:Cite news</ref> But, on 25 September 2009, ISRO announced that the MIP, another instrument on board Chandrayaan-1, had discovered water on the Moon just before impact and had discovered it 3 months before NASA's M3.<ref name="Water found">Template:Cite news</ref> The announcement of this discovery was not made until NASA confirmed it.<ref name="India first">Template:Cite news</ref><ref>Template:Cite news</ref>
M3 detected absorption features near 2.8–3.0 μm on the surface of the Moon. For silicate bodies, such features are typically attributed to hydroxyl- and/or water bearing materials. On the Moon, the feature is seen as a widely distributed absorption that appears strongest at cooler high latitudes and at several fresh feldspathic craters. The general lack of correlation of this feature in sunlit M3 data with neutron spectrometer H abundance data suggests that the formation and retention of OH and H2O is an ongoing surficial process. OH/H2O production processes may feed polar cold traps and make the lunar regolith a candidate source of volatiles for human exploration.Template:Citation needed
The Moon Mineralogy Mapper (M3), an imaging spectrometer, came to a premature end on 28 August 2009.<ref name="isro_pressrel_090829">Template:Cite web 101004 isro.org</ref> M3 was aimed at providing the first mineral map of the entire lunar surface. M3 data were reanalyzed years later and revealed "the most definitive proof to date" of the presence of water in shaded regions of craters near the Moon's north and south poles.<ref name=":0" />
Lunar scientists had discussed the possibility of water repositories for decades. They are now increasingly "confident that the decades-long debate is over" a report says. "The Moon, in fact, has water in all sorts of places; not just locked up in minerals, but scattered throughout the broken-up surface, and, potentially, in blocks or sheets of ice at depth." The results from the Chandrayaan mission are also "offering a wide array of watery signals."<ref>Template:Cite news</ref><ref>Template:Cite news</ref>
According to European Space Agency (ESA) scientists, the lunar regolith (a loose collection of irregular dust grains making up the Moon's surface) absorbs hydrogen nuclei from solar winds. Interaction between the hydrogen nuclei and oxygen present in the dust grains is expected to produce hydroxyl (Template:Chem2) and water (Template:Chem2).<ref>Template:Cite bookTemplate:Dead link</ref>
The SARA (Sub keV Atom Reflecting Analyser) instrument developed by ESA and the Indian Space Research Organisation was designed and used to study the Moon's surface composition and solar-wind/surface interactions. SARA's results highlight a mystery: not every hydrogen nucleus is absorbed. One out of every five proton rebounds into space, combining with electron to form an atom of hydrogen.<ref name=":2">Template:Cite web</ref> Hydrogen shoots off at speeds of around Template:Convert and escapes without being deflected by the Moon's weak gravity. This knowledge provides timely advice for scientists who are readying ESA's BepiColombo mission to Mercury, as that spacecraft will carry two instruments similar to SARA.<ref name=":2" />
Data from the microwave sensor (Mini-SAR) of Chandrayaan-1 processed using the image analysis software ENVI, has revealed a good amount of past tectonic activity on the lunar surface.<ref name="Tectonics 2014">Template:Cite journal</ref> The researchers think that the faults and fractures discovered could be features of past interior tectonic activity coupled with meteorite impacts.<ref name="Tectonics 2014" />
Data gathered by Chandrayaan-I was made available to the public by the end of the year 2010. The data was split into two sections with the first section going public by the end of 2010 and the second going public by the middle of 2011. The data contained pictures of the Moon and also data of chemical and mineral mapping of the lunar surface.<ref name="STravel">Template:Cite news</ref>
Follow-up missions
Template:MainChandrayaan-2 is a follow-up mission which was launched on 22 July 2019.<ref>Template:Cite web</ref> The mission includes a lunar orbiter, a lander named Vikram and a robotic lunar rover named Pragyan.<ref>Template:Cite web</ref> While a last-minute glitch in the landing guidance software resulted in the lander crashing, the Chandrayaan-2 orbiter is operational Template:As of.<ref name="Failure report">Template:Cite news</ref> A third mission, called Chandrayaan-3 was launched on 14 July 2023 and it successfully soft-landed on Moon on 23 August 2023<ref name="ISRO_Chandrayaan3">Template:Cite web</ref>
Lunar outpost
Chandrayaan's imagery will be used to identify regions of interest that will be explored in detail by the NASA Lunar Reconnaissance Orbiter. The interest lies in identifying lunar water on the surface that can be exploited in setting up a future lunar outpost. The Mini-SAR, one of the U.S. payloads on Chandrayaan, was used to determine the presence of water ice.<ref>Template:Cite news</ref>
.jpg){kind=link}
